Within the installation directory Apex comes with both, an apex.php script and an
apex phar archive. Both are
the exact same, but you may move the
apex phar archive within your environment path (ie. /usr/bin/) allowing
you to simply type "apex" instead of "php apex.php" to perform CLI commands.
Various CLI commands are built into Apex which help facilitate development and package / upgrade / theme management. You can view a list of all availble commands by typing "apex.php help" within terminal, and below explains all available commands.
Various general CLI commands are available allowing you to search all repositories for packages, install and upgrade packages / themes, plus more. Below describes all general CLI commands available.
Description: Lists all packages available to the system from all repositories configured on the system.
php apex.php list_packages
Description Searches all repositories configured on the system for a specific search term.
php apex.php search mailing list
install PACKAGE1 PACKAGE2...
Description: Downloads a package from a repository, and installs it on the system. This command allows you to specify multiple packages at one time as well.
php apex.php install webapp users transaction support
Description: Checks the repositories, and automatically downloads and installs any available upgrades. if desired, you may optionally specify a single package to upgrade. Otherwise, all installed packages will be upgraded. It's recommended to run this command about once a week to ensure your packages are always up to date.
php apex.php upgrade
Description: Checks the repositories for any available upgrades, and provides information on the latest available version of each package. This does not download or install the upgrades, and instead only provides what upgrades are available.
Description: Lists all themes available from all repositories configured on this system.
php apex.php list_themes
Description: Downloads the specified theme from the repository, and installs it on the system.
php apex.php install_theme mydesign
change_theme AREA THEME_ALIAS
Description: Allows you to change the currently active theme on an area. The
AREA should be either
"public" or "members", and then the alias of the theme you would like to activate. The theme must already be
installed on the system.
php apex.php change_theme public mydesign
Various CLI commands are available allowing you to easily create, publish, and delete packages and upgrades within repositories. Below explains all CLI commands available for package / upgrade development.
create_package PACKAGE [REPO_ID]
Description: Creates a new package on the local system, which can then be developed, and later published to a repository. This creates the necessary directories within /etc/ and /src/, and upon creation, you can begin creting components on the package via the apex.php script.
php apex.php create_package casino
Description: Scans the /etc/PACKAGE/package.php configuration file, and updates the database as needed. Use this during development, after you have updated the package.php file with new information such as config variables or menus, run this to reflect the changes within the database and system.
php apex.php scan casino
Description: After developing a package, you may publish it to the repository using this command. This
will compile the package, and upload it to the repository,. Once done, you can then begin installing the
package on other systems via the
install PACKAGE command.
php apex.php publish casino
Description: Completely removes a package and all of its components from the system. Please note, this does not remove the package from any repositories it has been previously uploaded to, and only removes it from the local system.
php apex.php delete_package casino
create_upgrade PACKAGE [VERSION]
Description: Creates a new upgrade point on the specified package. You may optionally define a version for the upgrade, and if left unspecified, the system will simply increment the third element of the current version by one. This will basically create an "image" of the package by creating a SHA1 hash of every file, and upon publishing the package, these hashes will be checked allowing the system to determine all modifications made to the package since the upgrade point was created. This allows for virtually hands free version control.
php apex.php create_upgrade casino
Description: Once you've completed developing an upgrade after creating the upgrade point, you can upload
it to the repository using this command. Once uploaded, all systems with the package installed can install
the upgrade on their system with the
apex.php upgrade command.
php apex.php publish_upgrade casino
Description: Creates a new theme, which can then later be published to a repository if desired. This creates the necessary directory structure within the /views/themes/ and /public/themes/ directories, from which you can begin creating the theme.
php apex.php create_theme mydesign
Description: Will publish the specified theme to the repository. Once published, it can be installed on
any system with the
apex.php install_theme THEME_ALIAS command.
php apex.php publish_theme mydesign
Description: Deletes the specified theme from the system, including all files and directories. Please note, this only deletes the theme from your local system, and not any repositories.
php apex.php delete_theme mydesign
There are a couple commands you will be using very frequently during development to create and delete components, which are explained below. Always ensure to create all components via the apex.php script, and NEVER manually create the files as they will not get registered to the package for publication. For details on all components supported by Apex, please visit List of Components.
create TYPE PACKAGE:[PARENT:]ALIAS [OWNER]
Description: Creates a new component on the system. Creating new components must adhere to the following rules:
TYPE variable is the type of the component, and must be one of the following:
PARENTvariable is only required for the component types of
tabpage. For "tabpage" components, naturally this needs to be the alias of the tab control to place the new tab page into. For the type "controller", this can be left blank, and it will create a new controller parent (eg. directory within /src/PACKAGE/controller/), otherwise is the parent controller to place the new controller into.
OWNERvariable is required for the types "controller", "tabpage", and "view". This is the package who owns the component, as these components can and will end up in a different pacakges /src/ directory. Upon publishing, this component will be included in the
OWNERvariable is also required for the "worker" component type, but instead of being the owner package, is the routing key for the worker. This defines which messages to route to the worker. For more information, please visit the worker Component page of this manual.
PACKAGE:PARENT:ALIASelement of the command is simply the URI of the new template (eg. admin/users/some_page)
php apex.php create lib casino:games
php apex.php create view admin/games/bets casino
php apex.php create worker casino:user users.user
php apex.php create controller core:http_requests:games casino
delete TYPE PACKAGE:[PARENT:]ALIAS
Description: Deletes a component from the system. The two variables passed are the exact same as the
create command above. This will permanently remove the component from the filesystem and database.
php apex.php delete lib casino:games
php apex.php delete view admin/casino/bets
php apex.php delete controller core:http_requests:games
Description: Scans the /etc/PACKAGE/packge.php configuration file, and updates the database as needed. Use this during development, after you have updated the package.php file with new information such as config variables or menus, run this to reflect the changes within the database and system.
php apex.php scan casino
There are several CLI commands available for general system maintenance, such as addinf / updating repositories, updating connection information for both mySQL master database and RabbitMQ, and more. Below explains all system maintenance commands available.
add_repo HOSTNAME [USERNAME] [PASSWORD]
Description: Adds a new repository to the system, which is then checked for available packages, themes and upgrades. The HOSTNAME is the base hostname of the repository, and you may optionally specify a username and password in case of a private repository, which will be provided to you by the owner of the repository.
php apex.php add_repo repo.somevendor.com myuser mypassword
Description: Allows you to update an existing repository already in the system with a username and password. Specify the hostname of the repo, and assuming it is already configured on the system, you will be prompted for a username and password, which will be provided to you by the owner of the repository. This is to gain access to any private packages you may have purchased.
php apex.php update_repo repo.somevendor.com
mode [DEVEL|PROD] [DEBUG_LEVEL]
Description: Changes the server mode between either development or products, and allows you to change the debug level between 0 -5.
php apex.php mode devel 4
Description: Specifies whether or not to save debugging information for the next requests, which can then be viewed through the Dev Kit->Debugger menu of the administration panel. The value passed must be one of the following:
php apex.php debug 1
Description: Changes the server type of the installation. The TYPE must be one of the following:
web, app, dbm, dbs, msg.
php apex.php server_type web
Description:Allows you to update connection information for the master mySQL database. Useful if the database information has changed, as upon that happening, you will no longer be able to access the software and this information is stored within redis versus a plain text file.
php apex.php update_masterdb
Description: Clears all slave database servers from redis, and begins only connecting to the master mySQL database. This is useful if connection information on one or more slaves has changed without first being updated in the software, as it will result in various connection errors by the software. Please note, upon clearing the slave database servers, you must enter the necessary slaves again via the Settings->General menu of the administration panel.
php apex.php clear_dbslaves
Description: Allows you to update the connection information for RabbitMQ. Useful if your connection information has changed, as it may result in the software throwing errors, and the RabbitMQ connection information is stored within redis versus a plain text file.
Description: Should never be needed, and compiles the core Apex framework for the Github repository. Places the Github repo of Apex within the system /tmp/ directory.
php apex.php compile_core